Dynamic Loading

MANUEL DOCK LEVELLERS


Manual dock levellers and drawbridges (aka. dock plates) provide an economical, reliable solution for basic docking operations. Acting as the bridge between your facility and the bed of a docked vehicle, manually operated Levellers and Drawbridges are easy to operate by hand, coming in a variety of configurations that do not require a power supply and incur no energy costs.

Dynamicloading mini manually operated swing-lip dock leveller, specifically developed for standard Loading area fleet of standardized vehicles, trailers, Truck with bed height. t is operated manually crank lever, cause of that mini dock leveller is extremely cost-effective and durable, our mini ramps are equipped with special spring which makes it easier to operate by hand and one-person operations are available. The design meets the demands of most simple loading operations and ensures employer compliance with all ergonomic requirements.

Manuel mini dock leveller is fitting in front of the building and no need for any extra concrete pit and supply very fast installations and operations,

The lip of the Manuel Mini dock leveller is made from carbon steel. The lip is designed extremely flat which ensures the rear connection to the dock edge is bump-free, This properties is supply smooth passages for operators from building and truck bed for Manual Handling Equipment. Mini ramp is best Solutions Loading and unloading with Manual Handling Equipment

GOODS LIFTS

Column type good lifts are cost-effective solutions that if you need high level chancing with low capacity. It is a cheap and safe solution to the chance level of goods that is not too heavy. Unlike standard elevator systems, good lifts don’t need heavy construction or extra free zone reduced pit requirements (only 14 cm) serve extra convenience at preparing of installing area.
The system can be operated between different level and have automation like a standard elevator system. Calling- stooping etc also the system can develop special requirements. Swing gate, safety fence and photocell sensors are available.

It is an efficient design with cost-effective solutions It helps to save your goods and budgets. Like all products, good lifts need less maintenance and low spare part cost after-sales.

VERTICAL DOCK LEVELLERS


Vertical ramps can be controlled electro-hydraulically and can be brought to a fully vertical position when not in use. They save space. It is easy and economical to install because it does not require any pit.
All components of the mobile ramp have CE or TSE. It is designed with 6000 kg dynamic and 9000 kg static loading capacity. It can be produced up to 10000 kg dynamic loading. All carrying construction is designed for maximum effectiveness and long time use. Vertical Dock Leveller have a reinforced steel bottom frame to reduce vibration it is very important at hand to lift.
The self-contained power unit with weatherproof cover is usually mounted on a shelf under the bridge, and easy-to-use wall-mount pushbutton controls are standard.The vertical ramp platform is operated by the hydraulic oil pump, valves, piston, and control panel. Through this simple but well-designed system, it is possible to control vertical ramps with a single button. The system is designed only for adjusting its position, it shouldn’t be used for lifting loads. Each system is equipped with a safety valve that prevents the oil flow so that the ramp does not descend unintentionally in the event of a power outage.

Hydraulic components and valves have sealing that is not affected by weather conditions.

Standard vertical ramp main platform dimensions are 200×150 cm (WxL). The vertical ramp carrying capacity is 7 tons during loading and unloading. Ramps can be selected in different sizes and capacities according to the width of the vehicle, carrying capacity of the ramp, etc.

You can contact your sales consultant to choose the most suitable standard or non-standard product that we will design specifically for you.

TELESCOPIC LIPS


Loading ramps provide maximum loading speed and efficiency by building a permanent bridge between the loading area and the vehicle in areas where there is a lot of entry and exit goods shipment.
The hinged loading ramp consists of 2 main parts. The first is the main platform, and the second is the lip. The lip can be hinged or telescopic. The hydraulic oil pump, valves, large and small pistons, and the control board move the main platform and lip properly. Valves control the order of movements of these pistons. Thanks to this simple but well-designed system, it is possible to control standard hinged ramps with a single button.
In telescopic ramps, a control button adds separately for the exit and entry of the telescopic lip. Hydraulic equipment is only used for changing the ramp position. It shouldn’t be used for lifting a load other than its weight. The system is equipped with a safety valve that prevents the oil flow so that the ramp does not descend unintentionally in the event of a power outage.
Standard loading ramp main platform dimensions are 200×250 cm (WxL). Hinged model lip size is 40 cm, telescopic model lip sizes are 60 and 100 cm. Ramp carrying capacity holds 7 tons during loading/unloading, and 9 tons in the closed position. Ramps can be selected in different sizes and capacities according to the width of the vehicle, carrying capacity of the ramp, etc.
You can contact your sales consultant to choose the most suitable standard or non-standard product that we will design specifically for you.

HINGED LIPS

Loading ramps provide maximum loading speed and efficiency by building a permanent bridge between the loading area and the vehicle in areas where there is a lot of entry and exit goods shipment.
The hinged loading ramp consists of 2 main parts. The first is the main platform, and the second is the lip. The lip can be hinged or telescopic. The hydraulic oil pump, valves, large and small pistons, and the control board move the main platform and lip properly. Valves control the order of movements of these pistons. Thanks to this simple but well-designed system, it is possible to control standard hinged ramps with a single button.
In telescopic ramps, a control button adds separately for the exit and entry of the telescopic lip. Hydraulic equipment is only used for changing the ramp position. It shouldn’t be used for lifting a load other than its weight. The system is equipped with a safety valve that prevents the oil flow so that the ramp does not descend unintentionally in the event of a power outage.
Standard loading ramp main platform dimensions are 200×250 cm (WxL). Hinged model lip size is 40 cm, telescopic model lip sizes are 60 and 100 cm. Ramp carrying capacity holds 7 tons during loading/unloading, and 9 tons in the closed position. Ramps can be selected in different sizes and capacities according to the width of the vehicle, carrying capacity of the ramp, etc.
You can contact your sales consultant to choose the most suitable standard or non-standard product that we will design specifically for you.

PERSONEL LIFTS


The system is designed for efficient and ergonomic usage. Side barrier-electric driver or diesel options are satisfying to you in any conditions. Self manoeuvring or pulled systems supply good ergonomic usage. Electric driver system is so quiet and cost-effective solutions at an especially sound sensitive area (hotel theatre etc) can be used with easily. The standard system capacity is 350 kg and can be raised up to 9- 16 mt at standard dimensions. Standard product is also a cost-effective solution.
Efficiency low maintenance safety control options, heavy-duty button system, emergency stop and overload valve to perform the clients best service at big outdoor jobs where platform workspace is critical.

SCISSORS LIFTS


Lift tables are used to raise and position materials or a worker in such a way as to supply handling, change the level of goods, reach to height working area or reduce potential injuries in a wide array of industries.
Lift tables are designed to impose proper ergonomic principles into common work functions, at maintenance, industry, school, office, rent and warehousing applications providing economical and easy-to-transport access solutions. Unlike the elevators, scissors lift(s) don’t occupy any area they can be fixed at pits and a smooth surface can be used.

Common Features


●Complies with ANSI MH 29.1-2003 “Safety Requirements For Industrial Scissor Lifts” and CE marked.
●Flow limiting valve at the cylinder to arrange the speed of the system.
●Electro-Hydraulic power unit with a maximum pressure device to prevent overload.
●All lifts have appropriate devices against collapse duty to failure of pipe or power.
●All connection miles and pipes are covered bronze material blocking corrosion.
●The system has Self-lubricating bearings on all pivots.
●All lifts need less maintenance also have nipples for grease.
●All hydraulic shaft system is made of honed pipe and chrome covered steel mile.
●All lift is covered with epoxy-based paint with colour options.
●All Hydraulic hoses appropriate to SAE J 517 C-100R.

Material Lifts


Material lifts are designed to change level goods. Heavy duty and ordinary systems can be supplied working level and load capacity can be changed according to clients requirements. Generally, the system is fixed on the ground and has a removable side barrel and sometimes the bottom table is designed with rotary properties.

It is compatible with steel materials and the system have standard safety properties. The system can be used inside or outside of the building. Special designed dropped design bottom steel sheets supply safely working every condition.

Single shaft, multi-shaft, tandem lifts and catering-cabin service lifts can be manufactured according to the special requirements of clients.

EMBEDDED YARD RAMPS

The embedded loading ramp serves as an extra operation area for the loading and unloading procedure. It is a special choice for loading with its strong body and efficient design.

Working-level and lip action can be adjusted easily via a hydraulic system.

Carrying capacity up to 25000 kg. This is very important difference in our systems.
Specially designed system demands of customers requirements solve your all problems from small loading to heavy-duty applications.

We use galvanised reinforced metal grid. This special system blocks slippery ever conditions.

MOBILE YARD RAMPS


The mobile loading ramps are special productions ramp systems that can be used in all factories that don’t have a dedicated loading area or sufficient space, loading facilities, logistic areas. Our ramps are specially designed and manufactured exactly as needed.
You can quickly turn your facility into a logistics base or loading area without requiring any construction investment or steel structure, and without causing any changes in your facility. In this way, you can export your goods and you can upload your products quickly without wasting time, money and problems. These systems can save your time and money and they will completely solve your installation problems.

They are reliable flexible systems that can quickly load and unload from a container or truck without the need for any special apparatus. By providing transportation from the ground to the transportation vehicle, it enables the loading and unloading operations to be carried out quickly. Flexible designed mobile ramps can be customized for the loading and unloading needs of customers, are compatible with loading vehicles (forklifts, pallet trucks) through their flexible design, and can easily load on all vehicles with their adjustable height. Durable, long-lasting, powerful, compact and robustly designed mobile loading ramps can help their users for many years problem-free with their customer-friendly features.

Custom-Made Surfaces And Grilles


Grids, one of the basic components of mobile loading ramps are specially manufactured by us to reduce slipperiness as well as to protect forklift wheels. Ramps are customized for load capacity and integrated into the system. In this way, grid breakage, which is one of the most basic problems of similar products is not seen in our systems.

User Friendly


Easy operating mobile loading ramps can be installed and used by only one personnel. Thus, efficiency increases by saving personnel in loading.

Hydraulic Systems


All hydraulic systems of the ramp are designed to be used by hand, and the height adjustment and loading position can be done easily and safely by single personnel.

Work Safety


Mobile loading ramps prevent property loss and personnel accidents at the time of loading by meeting all the requirements of international norms with side guards, hose burst valves and loading safety chains to meet all occupational safety requirements.

You can contact your sales consultant to choose the most suitable standard or non-standard product that we will design specifically for you.